Efficiency gains in FIL50 and FIL75

After five years of technical Research and Development in the industrial plants, Techno Plastic has achieved some considerable improvements, particularly in the Pet bottles recycling process. Not only can they now process materials at a higher contamination level (residual of paper, glue, metal, etc) but can also increment in production. This refers especially to their small and medium cut machineries (Fil 50 and Fil 75).
FIL 50
Fil 50 was created in order to satisfy those customers who needed both a reasonable level of economic investment and a modest volume of product. The machinery has gone through some major modifications in the extrusion screw profile, in the improvement of the main engine, and in the adoption of a metering pump of new generation. Fil 50 has passed from the starting 80 kg/h to the current 120 kg/h and more.
After a successful pre-series, the machine has consolidated its space in Techno Plastic’s product range and offers unreachable characteristics:

In this special line the above mentioned advantages and production increments do not require a high automation level of winding and packaging systems. This could bring to a further reduction of the initial investment costs.
FIL 75
Fil 75 has also taken advantage from the above mentioned improvements. It is possible to use highly polluted materials and to increase the production from 180 to 210 kg/h. These advantages, as for the Fil 50, have been obtained by keeping unchanged or even improving the mechanical safety margins.
For further information send an email to After Sales Service Manager, Davide Ori via the link below: