Ebser, the world’s leading manufacturer of brush machines, presents its new range of drilling and filling machines.

Over the past few years, Ebser has replaced its complete range of drilling and filling machine with the new VMC series. In the nearly 100-year history of the company, this new generation of machines set a new trend in know-how, function, quality and design. 

All these systems are designed for simplicity, flexibility, robustness and good accessibility, and for all kinds of brushes and brooms up to a length of 1200mm, from the production of small batches to large quantities.

 

Equipped with a CNC control with 4-5 servo axes, a high degree of flexibility is offered. All drives are directly controlled and therefore have a manageable sequence.

Through the linear and swivel motion on the sides, these machines offer a large clearance in the center, with can be used for various brush-frames.

The frames for the brushes are designed that they can be easily replaced. Via the specially developed “Easy-Click” system, the clamping stations can be exchanged within the brush frame without tools.

The machine is operated via the touch display via the newly developed software. 100% Microsoft compatible and thus easy to learn for everyone. The programs and parameters can be saved via USB-Stick.

The VMC series are subdivided into the following machine types:

With one drilling and one filling-tool station as well as two clamping stations.

Simple, low cost machine where the brush-bodies must be changed manually, between drilling and filling.

With two drilling and one filling-tool stations. Simple, low cost machine with shifting unit on the processing stations.

With two drilling and one filling-tool stations. Continuously working, low cost machine with shifting unit on the processing stations.

With three drilling and two filling-tool stations. Continuously working, with shifting unit on the processing stations.

All type of machines are equipped with wire feed with servomotor, adjustable picker-plate, switchable displacer, material-box with two colors, material beater, central lubrication, etc.

The shifting unit with the processing stations works pneumatically or optional with programmable linear axis with servomotor.

By simply lifting of the front hood as well as by the protective door in the rear area, access to maintenance and cleaning is more than guaranteed.

Further information and contact details can be found at http://ebser.de