SIBO engineering’s ideology can be summarized in eight simple words: “Learn from the past and design the future!” This is exactly what this company has been doing since its foundation in 1830 until today.

Today, SIBO introduces the LBE/2000: An effective solution for the production of broom sticks. The LBE/2000 is a fully automatic line producing sticks complete with round end, thread, hole and label. The line consists of: double trimming unit complete with loader, one rod milling machine model "TAU/60 a sanding machine model" 2LU/100 ", a roller conveyor for the extraction of the handles, double end-milling machine model "2TS/P", a drilling unit and a labelling machine.

At the beginning of the cycle the square bars are manually put into the loader, which feeds them one behind the other towards the two circular blades where they are all cut at the same length. At the end of this operation each piece is automatically loaded into the rod milling machine, then in the sander and finally on the end-milling machine where they will be drilled, and half-round milled on one side and threaded on the other side. At the end of the cycle the labels are applied to the handles.

Another example of SIBO's automatic lines for round sticks such as broom handles is the TTL/180. The line is composed of 2 machines: one double-cutting machine, one round rod-milling/sanding machine. The rough, square bars are manually placed into the loader that feeds one piece behind the other towards the 2 circular blades that cut every bar to the same length. After this procedure every bar is automatically loaded in the milling/sanding machine where the bars will be milled to become round and sanded.

For more information about SIBO Engineering, please click the company name link below where you will find full contact information, web and email links.