Abtex Corp. Helps Fishing-Equipment Manufacturer Maintain Quality, Cut Cost
Since 1996, Traxstech Corporation has manufactured a wide range of fishing equipment that turns high-end watercraft into high-performance sport-fishing vessels.
The company manufactures various mounts, rod storage devices, downriggers, planer reels and masts, electronics and accessories at its Chesaning, Michigan plant. Quality is built into the company’s culture, and all its products are covered by a lifetime warranty.
To fabricate these products, Traxstech uses approximately 40 tons of aluminum every year. The aluminum is precision saw-cut into more than 1000 parts that go into 140 different assemblies, according to Traxstech owner Jeff Miller.
“Every cut leaves a burr,” Miller said. “and every burr can pose a quality or a safety problem. During manufacturing, burrs keep the parts from fitting into the jaws of our CNC machines. Our finished products need to be burr-free to fit precisely together. Besides, sharp edges on a boat could be dangerous to passengers and crew.”
For years, Traxstech deburred manually with hand sanders, files, blades, and anything else that would work. But as business increased and the company grew, hand-deburring became inefficient and impractical.
“A few years ago I was visiting a supplier that was using an Abtex deburring system,” Miller said. “I knew Abtex had a good reputation in the industry, and the supplier couldn’t recommend them highly enough. I called Abtex and they had me ship them some parts so I could see what could be done.”
Liking the results, Miller purchased a single-head, semi-automatic end deburring system, with Abtex-customized brushes designed specifically for Traxstech. The 2-horsepower motor drives a 12" nylon abrasive filament brush, and the machine features a variable-speed drive. Its table accommodates extrusions from four to 46 inches long.
“I knew this was the machine we needed,” Miller said. “Having full control over the speed allows us to maintain high quality and efficiency at the same time. We can now create consistent 0.060-in. radiuses.”
Miller used to worry about payback since the machine would sit idle for long periods.
“That doesn’t bother me now,” he said. “It’s a very short learning curve, so any of our guys can jump on it anytime. The system paid for itself in 24 months.”
If you are interested in discussing your specific
needs, please contact us at 888.662.2839, sales@abtex.com
or visit us on
the web at www.abtex.com
Related Articles
Abtex, LLC. Promotes Christian Donovan to V.P., Operations
29/06/2021
Archived -
Abtex LLC Hires New Design Engineer
05/10/2020
Archived -
Abtex LLC Enhances Productivity of Western Shelter in Coronavirus Relief Operations
05/08/2020
Archived -
Abtex can Help you Solve your Deburring Challenge!
01/08/2020
Archived -
Abtex LLC. Releases New Updated ARTIFEX USA Website to Demonstrate Expanded Surface-Finishing Capabilities
16/06/2020
Archived -
The Malish Corporation Acquires Abtex Corporation
09/12/2019
Archived -
Abtex Corp. Launches Streamlined Web Site
02/08/2019
Archived -
Focusing on Continued Growth, Abtex Corp. Adds Business Development Manager
12/03/2019
Archived -
Abtex Corp. Promotes Damian Clemons to Engineering VP
09/09/2018
Archived -
Abtex Promotes Jason Saner to President
23/07/2018
Archived -
Abtex Corporation Offers Full Line of Engineered Nylon Abrasive Brushes and the Machines That Power Them
29/06/2018
Archived -
Business Growth Spurs Hiring at Abtex Corp.
11/06/2018
Archived -
Abtex Corp. Growth Continues
14/12/2017
Archived -
Abtex Corp Hires Key Design Engineer
02/05/2017
Archived -
Abtex Corp. Hires Two Manufacturing Prefessionals
14/02/2017
Archived -
Abtex Corp’s Small-Space Deburring System Creates Big Productivity Gains for Automotive Manufacturer
14/10/2016
Archived -
Abtex Deburring System Enhances Safety and Production for Leading Canadian Chute Manufacturer
17/06/2016
Archived -
Abtex Corp. Hires New Operations Manager
01/05/2016
Archived -
Abtex Promotes Damian Clemens to Systems Group Manager
07/12/2015
Archived -
Abtex Corp. Helps Electronics Manufacturer Boost Quality and Productivity
01/12/2015
Archived -
Abtex Corp. Solves Difficult Fine-Blanking Deburring Problem
12/11/2015
Archived -